Kanban Playing Card Toppers
Here are a couple of cards made using the Playing Card Toppers from Kanban
 |
|
Ace
This card was made by firstly using a sage green piece of pearlescent card and using the Big Shot and texture plate. Once I had textured the card I used a soft foam sanding block with a fine grain and sanded over the top of the embossed card to distress it slightly.
I cut 3 various blocks and mounted them onto gold mirri card and punched and set small copper eyelets in the corners using the crop-a-dile. Two of the the Ace toppers were attached to the card using double sided tape and the middle one has been mounted on foam pads to add a bit of dimension.
Eyelets were then used on the top right hand corner as decoration. The word Ace has again been cut using the Cricut as on the Goal Card previously.
|
 |
|
Feelin' Lucky
This is a slider card, instructions for this are explained on the Fathers Day Card with the Dart Board.
The four toppers are attached using a brad and a Joker card placed on the back of the card.
The images of the four suits of playing card have been drawn and coloured free hand.
|
Project Designer: Pat White
Hi i'm Pat and I am thrilled to be part of the design team here at Crafty Devils. I live in Devon in an old farmhouse. I have two adult (?) children, one of which has flown the roost and my daughter still lives at home with myself, husband my father ... [More]
View further craft projects by this designer.
Kanban Playing Card Toppers |